WALD SPORTS LINE BLACK BISON EDITION FOR JIMNY NOMADE
Original price was: ¥510,000.¥500,000Current price is: ¥500,000.
WALD Body Kit for SUZUKI JIMNY includes FRONT BUMPER SPOILER + REAR BUMPER SPOILER+ JAPAMERICANA GRILLE
You can also purchase individual parts. See the prices below.
![]()
This can be shipped via economy sea shipping to most parts of Asia, the US, and Europe. However, the territories cannot be covered with this shipping; we may request an additional shipping charge after the buyer places the order.
Description

FRONT BUMPER SPOILER[UN-PAINTED] – 195,000 yen
Made of ABS plastic. Includes net and license plate holder. LED lamp (LEDSL10P – 50,000 yen) sold separately.
The parts attached to the lower part of the front bumper are not included as they are part of the overfender set.
Unpainted parts.
Paint can be arranged for a separate cost

REAR BUMPER SPOILER – [UN-PAINTED] – 175,000 yen
Made of ABS plastic. The attached parts for the ends of the rear bumper are not included as they are part of a set with the overfenders. Drilling is required for the sonar sensors.
Unpainted parts.
Paint can be arranged at a separate cost

OVER FENDER [UN-PAINTED] – 330,000 yen
Made of ABS plastic. Requires WALD front and rear bumper spoilers to install the included parts. 14 pieces.
Approximately 30mm wider on each side. Decorative screws sold separately.

JAPAMERICANA GRILLE [UN-PAINTED] – 130,000 yen
Made of ABS plastic. Includes a mesh net. If installing this item alone, modifications are required for vehicles equipped with headlight washers.
Unpainted parts.
Paint can be arranged for a separate cost

FRONT ROOF SPOILER – 150,000 yen
Made of FRP. LED lamp (LEDH MLB1030)
Unpainted parts. Paint can be arranged at a separate cost

BONNET SCOOP COVER & LED WINKER – 140,000 yen
Made of FRP. WALD hood badge included. Metal hood badge A / B type is optional.
Unpainted parts. Paint can be arranged at a separate cost

SPARE TIRE COVER – 45,000 yen
Made of FRP. A genuine tire cover is required.

REAR ROOF SPOILER – 110,000 yen
Made of FRP.
Unpainted parts. Paint can be arranged for a separate cost

SIDE MUFFLER OVAL80W [AT or MT] – 175,000 yen
For JIMNY SIERRA. Only AT cars support vehicle inspection. Made of all stainless steel. Made by DTM SPORTS.

OPTION: METAL HOOD BADGE A TYPE – 25,500 yen
49Φ. Chrome / black. option.
JIMNNY SIERRA & JIMNY

OPTION: METAL HOOD BADGE B TYPE – 25,500 yen
49Φ. Chrome / black. option.
JIMNY SIERRA & JIMNY

BONNET SCOOP COVER WITH HOOD BADGE – 119,500 yen
Made of FRP. WALD hood badge included. Metal hood badge A / B type is optional.
JIMNY SIERRA & JIMNY

VORSALINO SUV 1PC CAST / V11-C SUV
for JIMNY/JIMNY SIERRA SPORTS LINE BLACK BISON EDITION
| FENDER TYPE | SIZE | inset | PRICE | PCD/hub diameter | ||
| JIMNY SIERRA | WALD OVER FENDER SIZE |
15 x 6.5 | -15 | 52,900-yen | 5/139 | 108φ |
| JIMNY SIERRA | NORMAL FENDER SIZE |
16 x 5.5 | 0 | 54,000 yen | ||
| JIMNY | NORMAL FENDER SIZE |
16 x 5.5 | 20 | 54,000 yen | ||

FRONT SEAT – 90,000 yen
* 10 base colors / 14 stitch colors / 3 headrest embroidery designs.
* FRONT / REAR SET can be embroidered on the rear seat and installed on the backplate.
JIMNY SIERRA & JIMNY

FRONT/REAR SEAT – 120,000 yen
Embroidery on rear seats and back plate installation is 3,200-yen G/place
JIMNNY SIERRA & JIMNY

A-PILLAR – 28,500 yen
* 10 base colors
JIMNNY SIERRA & JIMNY

TRIANGLE PILLAR – 27,500 yen
* 10 base colors
JIMNNY SIERRA & JIMNY

STEERING TYPE 1 – 78,600 yen
*8 base colors / 8 stitch colors
JIMNNY SIERRA & JIMNY

STEERING TYPE 2 – 78,600 yen
*8 base colors / 8 stitch colors
JIMNNY SIERRA & JIMNY

FLOOR MAT – 47,500 yen
* 6 base colors / 12 trim colors.
* AT / MT vehicles must be specified when ordering.
JIMNY SIERRA & JIMNY

LUGGAGE MAT – 49,600 yen
* 6 base colors / 12 trim colors.
JIMNNY SIERRA & JIMNY
You must be logged in to post a review.













Reviews
There are no reviews yet.