Description

Steering Switch Case for GR Corolla
This kit allows you to transfer the function switches from the factory steering wheel directly into a dedicated switch case when upgrading to an aftermarket steering wheel.
We developed this product for the GR Corolla by leveraging our design expertise from previous models.
We optimized the switch layout by incorporating rocker-style paddle switches for some of the functions.
This design enables compatibility with a wide range of aftermarket steering wheels.

[Delivery Time]
Due to our website’s system, the status may display “In Stock” even when items are currently unavailable.
We are currently receiving a high volume of orders, so please allow approximately one month for delivery.

[Materials]
Front: Dry Carbon / Back: ABS

[Confirmed Compatible Steering Wheels]
-Confirmed as of December 1, 2022. We will update this list as new models are confirmed.

momo JET 32
momo M08
OMP WRC
OMP Targa 33
OMP VOLANTE 320*
*Requires a separate 5mm spacer.

[Note] A separate steering wheel boss (hub adapter) is required for installation.

[About Bosses and Rapfix II]
The Steering Switch Case (hereinafter “SSC”) is compatible with Works Bell bosses and the Rapfix II quick-release system.
Installation order options are as follows:

■Installation Order
Pattern 1
Vehicle → Boss → SSC → SW
Pattern 2
Vehicle → Short Boss → Rapfix II → SSC → SW
Pattern 3
Vehicle → Short Boss → SSC → Rapfix II → SW

*SSC (Steering Switch Case)
*SW (Steering Wheel)
*Pattern 2 requires a 13-pin insulator/flipper.
*Pattern 3 requires a 15mm spacer between the short boss and the SSC.

[About the 13-Pin Insulator]
When securing the wheel using the Rapfix II, this product is installed between the steering wheel and the Rapfix unit (see Pattern 2 above).

In this case, a pre-wired 13-pin insulator is required.
Note: The standard Works Bell 13-pin insulator does not come pre-wired. We sell pre-wired 13-pin insulators, so please feel free to contact us.

【Regarding the GTC】
When installing with the Works Bell RAPFIX GTC, the connection between the SSC and the roll connector must be routed outside the unit itself; otherwise, installation is not possible.
If you select the GTC when ordering, the necessary additional parts will be included:
Dedicated wiring (extension cord): ¥3,000
15mm spacer: ¥1,900

【Installation with MOMO Steering Wheels】
When installing a MOMO-compatible horn button, you may need to modify the horn ring included with the Rapfix II (e.g., by filing it down) to allow the wiring to pass through.
Please exercise caution during assembly to avoid damaging the steering switch case wiring.

【Regarding Installation】
We offer installation services at our shop.
For this service, you must either purchase the Rapfix components (Rapfix unit, vehicle-specific short boss, flipper, 13-pin insulator) or steering boss from us, or bring them in yourself.
If you wish to have the installation done here, please select and purchase the pre-modified 13-pin insulator.
If you bring in an unmodified 13-pin insulator, we cannot perform the installation on the same day.

【Regarding GR Yaris Facelift (Gen2) Models】
For the GR Yaris Facelift (Gen2) 6MT, installation is possible by purchasing this product.
For the 8DAT model, please purchase this product along with the paddle unit (aluminum or carbon).
A dedicated product page will be provided separately.