Description

Front Half Spoiler – 115,000 yen
For late-model vehicles (September 2017 onwards) with standard bumpers
・FRP construction; gel-coat finish; unpainted
A front spoiler designed to fit over the factory bumper. It adds a sense of substance to the front end, creating an imposing, low-slung look even at stock ride height.
Plastic mesh inserts come standard in the spoiler’s air ducts.
Features a high-quality finish with meticulous attention to detail.
*Compatible with Black Edition and 70th Anniversary models.
*Optional parts
Daytime running light panels featuring embedded 5-unit Japanese-made LED arrays are available separately (see below).

LED Day Light Panel – 92,000 yen
For late-model (September 2017-) Elford half spoiler only
-FRP base finish A
Day lamp panel with 5 Japanese LED bulbs embedded on each side in the Elford front half spoiler. By installing a day lamp, you can dress up and improve the visibility of the vehicle at the same time. Furthermore, since the connection coupler also uses a waterproof type, it is a safe specification that minimizes the risk of lighting defects.

Aero step cover – 140,000 yen
Compatible with all models (for standard sidestep installation)
・ Gel coat finish made of FRP
・ With Elford emblem
It is possible to lower the ground height by 60 mm by covering it with a genuine plate-type side step. Achieves sporty styling by balancing the side view volume when an externally made aero and genuine OP aero are installed. In addition, one of the features is the modeling that supports separate painting. The amount of overhang of the main body has also been taken into consideration so as not to impair the ease of getting on and off.
(Ground height) 60mm down from the original

Rear bumper spoiler – 285,000 yen
*Note: For gasoline-powered vehicles, there are separate versions for models produced between September 2017 and July 2020, and for those produced from August 2020 onwards. Please specify the model year when ordering.
・Material: FRP (Fiber-Reinforced Plastic); unpainted gel-coat finish.
・Compatible with 2TR-FE (2.7L gasoline) engines.
・Compatible with 1GD-FTV (clean diesel) engines.
・Includes a stainless steel bypass muffler.
*Achieves a realistic dual-exhaust (left and right) setup.
・Includes reflectors.
・Compatible with spare tire installation.
*Requires removal of the rear towing hook.
This is a signature Elford replacement-type bumper spoiler designed to create a “muffler-less” look. The included stainless steel bypass muffler routes exhaust through the bumper-integrated tail finishers—genuine Lexus LS parts—delivering a real exhaust output. It transforms the vehicle’s appearance from the standard rear view into a style that is incomparably elegant and exciting.

OPTIONAL PARTS

Elford Half Spoiler Exclusive 30mm Overfender [UNPAINTED] – 90,0000 yen
・ FRP gel coat finish, unpainted product
・ 30mm wide (one side)
・ All 6 pieces (with backside)
This is an over-fender dedicated to the Elford half spoiler for late models. By combining it with a half spoiler, it adds an accent to the side view, increases the sense of wideness, and changes it to a powerful purity.
* Structural changes due to changes in vehicle width are required.

Rear wing [Unpainted] – 90,900 yen 
Common to all cars (compatible with front, middle, and late models)
-FRP white gel coat finish.
-Double-sided tape type for easy installation.
Since it is a type of rear wing that can be placed over the genuine rear spoiler, the genuine high-mount stop lamp and rear wiper brain functions can be used as they are. Compared to the normal hanging shape, it is slightly larger and extends backward. The raised line enhances the sporty feeling.

Rear half spoiler – 155,000 yen / Rear Half Spoiler with Muffler Cutter – 290,000 yen
For late-model (September 2017- ) * For gasoline vehicles, there are settings for vehicles from September 2017 to July 2020 and for vehicles after August 2020. Please let us know the model year when ordering.
・ Conforms to safety standards (vehicle inspection-compliant product)
・ FRP unpainted gel coat finish
・ Dedicated reflector included
・ Bottom spare tire can be installed
* The rear side tow hook must be removed to install the muffler
It is a set product of a half-shaped rear spoiler that is attached over a normal standard bumper and a dedicated muffler for vehicle inspection.
Since it does not use a genuine reflector, it is a half-type but has a big makeover from the original.
Stainless steel is used for the attached dedicated muffler. The tail end uses an oval-shaped 115mm tail for a simple yet powerful rear view. Equipped with a tail slide function, the spoiler can be adjusted to the desired protrusion width.
* The product has holes for the rear corner sensor and rear sensor.
If the car is not equipped, please purchase a dummy sonar (sold separately).
Sold separately: LED reflector
By replacing and wiring from the genuine reflector, the small / brake double lighting is realized with 30% light emission when the small lamp is lit and 100% light emission when the brake lamp is lit. Not only the rearview dress-up effect improved, but the visibility from the following vehicle is also improved and the rear-end collision prevention effect is also demonstrated.

Sold separately: Dummy
Sonar for rear half spoiler: Dummy sonar for cars without the genuine optional clearance sonar. Attach it to the back of the product with double-sided tape.
* The product is not painted.
* “Dummy sonar for rear half spoiler” can also be purchased at the online shop.

Rear half spoiler – 155,000 yen / Rear Half Spoiler & Muffler – 320,000 yen

For late-model (September 2017- ) * For gasoline vehicles, there are settings for vehicles from September 2017 to July 2020 and for vehicles after August 2020. Please let us know the model year when ordering.
・ Conforms to safety standards (vehicle inspection-compliant product)
・ FRP unpainted gel coat finish
・ Dedicated reflector included
・ Bottom spare tire can be installed
* The rear side tow hook must be removed to install the muffler

It is a set product of a half-shaped rear spoiler that is attached over a normal standard bumper and a dedicated muffler for vehicle inspection.
Due to the shape that does not use a genuine reflector, a major makeover from the original is realized even though it is a half-type.
Stainless steel is used for the attached dedicated muffler. The dedicated muffler is a type X that uses a 120 x 85 mm dual square tail. Produces an elegant and gorgeous rearview like no other. The tail end is equipped with a tailslide function that can be adjusted to the desired protrusion width.

Sold separately: LED reflector
By replacing and wiring from the genuine reflector, the small / brake double lighting is realized with 30% light emission when the small lamp is lit and 100% light emission when the brake lamp is lit. Not only the rearview dress-up effect but also the visibility from the following vehicle is also improved and the rear-end collision prevention effect is also demonstrated.

Sold separately: Dummy
sonar for rear half spoiler Dummy sonar for cars without the genuine optional clearance sonar. Attach it to the service hole of the product body with the attached double-sided tape.
* The product is not painted.
* “Dummy sonar for rear half spoiler” can also be purchased at the online shop.

FRP Lightweight aero bonnet – 190,000 yen

For late-model ( September 2017- )
, base finish
, split rain protector included
, support rod included
* Genuine bonnet damper cannot be used

A lightweight aero bonnet with two types: FRP specifications and partial carbon specifications.
While taking advantage of the genuine bonnet shape, the triple louvers arranged on both sides give the taste of the ultimate sports. The rear end of the bonnet is flapped in a flip-up shape to rectify the wind that hits the windshield.
In addition, the triple louvers arranged on both sides are real ducts, but since a removable “split rain protector panel” that is excellent in rainwater countermeasures is attached, consideration is given to measures against flooding in the engine room. The engine.
By installing a lightweight aero bonnet, the weight of the front is reduced and a light steering feel is also realized.

Front Grill [Unpainted] – 95,550 yen
* September 2017-There are settings for vehicles up to July 2020 and for vehicles after August 2020. Please let us know the model year when ordering.
・ FRP gel coat finish
・ Genuine T mark (Toyota mark) emblem (millimeter-wave radar) can be installed
・ Genuine (normal) bumper can also be installed
A horizontal fin-type front grill with the motif of LEXUS GX460. By laying the fins sideways, it brings a visual effect that emphasizes the sense of wideness. It brings an elegant and luxurious atmosphere that sets it apart from the genuine grill. It also supports the presence or absence of a front camera, so it can be installed on any vehicle.

 
Sonic Art Alloy Wheels – 420,000 yen
The concept of Sonic Art is a “Fusion of performance and beauty of appearance”. By adopting a cover type that has little effect on the design and combining it with the concave shape that is dropped from the outermost circumference of the rim to the center part, it has a spoke shape that is supple and stretches from the center to the rim end. In addition to a sophisticated design such as diamond cutting on the spoke surface, the flow-forming method realizes ultimate lightness (13.4 kg/piece). Although it is 22 inches in size, it is lighter than the genuine wheel, so it also emphasizes athletic performance. Sonic Art is the “lightest and most powerful wheel for Prado”, which is suitable for calling it art that combines performance and aesthetics.
Size: 22 x 9.5J 6H-139.7 Inset +20
Color: Sonic Black / Diamond Cut Face
Flow-forming method
Accessories: Aluminum center cover set, black aluminum air valve
Standard: JWL, VIA standard-compliant product