Description

●Designed Specifically for GR86/BRZ
This armrest pad is designed and styled exclusively for right-hand drive, manual transmission versions of the Toyota GR86 (ZN8, Oct. 2021 onwards) and Subaru BRZ (ZD8, Aug. 2021 onwards).
It attaches to the center console using adhesive tape.
*Note: Not compatible with automatic transmission consoles.

●Custom Design to Match the Interior
We use our own proprietary synthetic leather, specially colored and textured with a grain pattern to match the finish of the GR86 and BRZ consoles.
Red double-stitching along both sides complements the interior’s texture, adding a sportier feel to the cabin.

●Synthetic Leather Combining Texture and Durability
We settled on a material often used by OEMs.
We selected a synthetic leather that offers both the soft feel of genuine leather and high durability, while being easier to maintain.
This material is widely used in automotive components requiring durability (such as armrests and seats) and those requiring a premium feel (such as door panels and dashboards).

●Supports the Arm to Reduce Strain
This pad creates a resting spot for your arm when your hand is on the shift knob, allowing you to rest your arm during frequent gear changes—such as while waiting at traffic lights or in stop-and-go traffic during city driving.
The pad naturally supports your arm, contributing to a more comfortable driving experience.

●Natural Support When You Need It
We aimed to provide natural support when your hand is on the shift knob without interfering with driving operations.
If the pad protrudes too much, it gets in the way; if it is too thin, it offers poor support. After determining the ideal balance, we set the thickness at the center of the pad to approximately 40mm.
We also carefully calibrated the thickness of the underlying cushion layer; if too thin, it bottoms out and causes discomfort, while if too thick, it sinks too much and prevents you from bracing yourself effectively. After extensive testing, we adopted an 8mm urethane cushion. *This product is sized to fit the factory seat and shift knob; if these have been replaced with aftermarket parts, or depending on your physique or seating position, you may not fully experience the intended support effect.

●Easy, tool-free installation (estimated time: 1 minute)
Designed specifically for this vehicle, it requires no drilling or screw-based mounting.
The mounting surface is shaped to perfectly match the interior contours of the GR86 and BRZ, allowing for secure installation using only adhesive tape.
It utilizes adhesive tape with hook-and-loop fasteners, enabling you to detach and reattach just the pad itself after the initial installation.
*Please remove this product if it interferes with gear shifting, such as during spirited driving.

●Compatible with factory equipment
Designed specifically for the manual transmission (MT) model’s console, it does not obstruct the opening or closing of the factory console box.
It allows for USB cables to be routed out from inside the console box and does not interfere with the console’s switches.

●Carefully selected adhesive tape
You might be concerned about the durability of an installation relying solely on adhesive tape.
We use adhesive tape that has undergone rigorous safety testing, including simulations of high temperatures (like a car interior under the scorching sun) and low temperatures (like mid-winter conditions).
To ensure optimal tape performance, please clean the mounting area with the included degreasing wipe before installation.
*Perform installation when the interior temperature is between 15°C and 35°C. Adhesive performance may be compromised outside this range (especially in cold interiors).

●Installation Method
Adhesive strength decreases in low temperatures; please perform the installation when the interior temperature is between 15°C and 35°C.
1. Use the included degreasing wipe to remove dirt and oil from the mounting area on the center console, then let it dry.
2. Peel off the backing paper from the hook-and-loop fastener and press it firmly onto the center console.
*The adhesive cannot be repositioned once applied, as doing so reduces adhesion strength. *To ensure stable adhesion, leave the product undisturbed for 24 hours without peeling back the hook-and-loop fastener or applying weight to it.
*Remove this product if it interferes with gear shifting, such as during spirited driving. When reattaching the product, ensure the hook-and-loop fasteners are aligned correctly.

●Before Purchasing
・This product is designed exclusively for right-hand drive manual transmission (MT) models of the following vehicles:
Toyota GR86 (Model: ZN8; Model Year: Oct. 2021 onwards)
Subaru BRZ (Model: ZD8; Model Year: Aug. 2021 onwards)

*Compatibility may not extend to vehicles with specifications changed after the survey date (December 2022).
・This product attaches to the center console using adhesive tape.

●Caution: Please read carefully.
・Do not install in any location other than the specified area.
・Do not use for any purpose other than its intended use.
・Upon removing the product, a mark resembling an installation outline may remain due to sun fading on the surrounding surface.

Part Number: NZ838
Product Name: Armrest Pad for GR86/BRZ
Color: Black
Product Weight: 195g
Product Dimensions: H137 x W190 x D53 (mm)
Package Weight: 252g
Package Dimensions: H180 x W195 x D55 (mm)