Description

Cool face Half spoiler ver.1 
Material: FRP

• Ducts on both sides are black aluminum net specifications, with no holes for mounting LED lights.
• Type to cover the bumper
• Approximately 30 mm in front of the normal. About 80 mm below.
• Vehicles equipped with collision avoidance support can also be installed in the latter half of Type 4.
• Vehicles with sensors cannot be installed.
• Vehicles after April 2022 MC cannot be installed due to the change in fog lamp shape, and vehicles equipped with a sensor as standard equipment.

L Mode Bumper 
Material: FRP / LED Light not included

L-Mode Bumper / LED Light Base + 10 LED Lights 
Material: FRP

L-mode bumper/ LED Light Base + 8 LED Lights 
Material: FRP

L-mode bumper 
Material: FRP

• If you don’t need fog and LED lights, you can install them reasonably with just the bumper!
• Narrow L-mode bumper
• Front bumper replacement type with integrated grill. LED light / LED light base kit is sold separately.
• Only the bumper body has aluminum net specifications for the side ducts.
• The forward protruding dimension is a safe design of about 17 mm from the standard bumper.
• Use genuine fog lamps
• LED light base and LED lamp are sold separately.
• Cannot be installed on vehicles with 4/5/6 type collision avoidance support package or sensors. For other details, please consult with the retailer before purchasing.
• Prices and specifications are subject to change without notice.

Front Lip Spoiler [Unpainted] – 52,900 yen / [Painted] – 76,900 yen
For Type 4/5/6 (Standard body)
Material: FRP

• Aluminum net specifications for ducts on both sides
• LED light base kit is available as an option.
• Prices and specifications are subject to change without notice.

Front Lip Spoiler with LED 
Material: FRP

• Aluminum net specifications for ducts on both sides
• 8 LED lights, wiring kit set
• Easy installation with tapping screws
• The base panel is painted black matte so it can be retrofitted.* LED light base kit is available as an option.
• Prices and specifications are subject to change without notice.

Wide Over Fender 
Material: FRP

• Wide type over fender
• Thickness is about 9 mm. Approximately 20 mm below both front and back.
• Fixed with double-sided tape and screws.
• Dummy screws are available as an option for the screw part on the surface. [24 pieces plus screw head] – 5,9600 yen
• Prices and specifications are subject to change without notice.

Sidestep ver.1 
Material: FRP

• Side step for long cars
• 4-door, 5-door common design
• Installation can be firmly fixed to the lower part with specially designed metal fittings.
• Prices and specifications are subject to change without notice.

Sidestep ver.2 
Material: FRP

• Side step for long cars
• 4-door, 5-door common design
• Similar to Ver.1, the installation can be firmly fixed to the lower part with specially designed metal fittings.
• Prices and specifications are subject to change without notice.

Over fender (for DX van only) 
Material: FRP

• Narrow and wide common
• Large over fender for vans (* DX vans only)
• S-GL vehicles cannot be installed because the inner panel of the sliding door is thick and hits. Only for DX with a thin inner panel.
• When using a normal hinge, only for DX vans
• Large size with front approx. 30 mm and rear approx. 35 mm
• One set
• Can be worn together with our aero parts.
• Prices and specifications are subject to change without notice.

Rear Bumper Spoiler ver.1
For High Ace (Narrow / Standard / Normal Roof / High Roof) Type 1/2/3/4/5/6 Standard body
Material: FRP

• Best-size rear bumper spoiler
• Sports type
• A type that can be installed by covering it without removing the normal bumper.
• For vehicles with steps, a type that takes steps
• Prices and specifications are subject to change without notice.

Rear Bumper Spoiler ver.2 
For High Ace (Narrow / Standard / Normal Roof / High Roof) 1/2/3/4/5/6 type for standard body
Material: FRP

• Specifications: Wagon look, muffler with arch, made of FRP
• For cars with steps, the steps are hidden, and it looks like a wagon.
• A type that can be installed by covering it without removing the normal bumper.
• Bottom type, smoothing step type that covers the step part
• It is necessary to process the metal fittings of the catch part. (*Especially for cars with auto closure of 4 types or later, cutting processing is also available, so please consult the installation pro shop.)
• Prices and specifications are subject to change without notice.

Rear Bumper Spoiler ver.3
For High Ace (Narrow / Standard / Normal Roof / High Roof) 1/2/3/4/5/6 type For standard body
Material: FRP

• Specifications: Wagon-look mufflerless type made of FRP
• Bumper with smoothed muffler arch
• Bumper to cut the exit according to your favorite muffler
• Do not install the normal muffler as it is dangerous.
• For cars with steps, the steps are hidden, and it looks like a wagon.
• A type that can be installed by covering it without removing the normal bumper.
• It is necessary to process the metal fittings of the catch part. ( Especially for cars with auto closure of 4 types or later, cutting processing is also available, so please consult the installation pro shop.)
• Prices and specifications are subject to change without notice.

Rear Bumper Spoiler ver.4
For High Ace (Narrow / Standard / Normal Roof / High Roof) 1/2/3/4/5/6 type For standard body
Material: FRP

• Specifications: Stepped type made of FRP
• For vehicles with steps, a type that takes steps
• A type that can be installed by covering it without removing the normal bumper.
• Sporty design for single muffler
• Customers are requested to check compatibility with commercially available mufflers and muffler cutters.
• The center part of the photo is specially painted.
• Prices and specifications are subject to change without notice.

Rear Bumper Spoiler ver.5
For High Ace (Narrow / Standard / Normal Roof / High Roof) 1/2/3/4/5/6 type For standard body
Material: FRP

• Specifications: Stepped type made of FRP
• For vehicles with steps, a type that takes steps
• A type that can be installed by covering it without removing the normal bumper.
• Sporty design for double muffler
• For double muffler and double muffler cutter
• The center part of the photo is specially painted.
• Prices and specifications are subject to change without notice.

Rear Bumper Spoiler ver.6
For High Ace (Narrow / Standard / Normal Roof / High Roof) 1/2/3/4/5/6 type for standard body
Material: FRP

• Specifications: Stepless type made of FRP
• For cars with steps, the steps are hidden, and it looks like a wagon.
• A type that can be installed by covering it without removing the normal bumper.
• Sporty design for single muffler
• It is necessary to process the metal fittings of the catch part. (* Especially for cars with auto closure of type 4 or later, there is also a cut process, so please consult the installation pro shop.)
• Prices and specifications are subject to change without notice.

Rear Bumper Spoiler ver.7
For High Ace (Narrow / Standard / Normal Roof / High Roof) 1/2/3/4/5/6 type for standard body
Material: FRP

• Specifications: Stepless type made of FRP
• For cars with steps, the steps are hidden, and it looks like a wagon.
• A type that can be installed by covering it without removing the normal bumper.
• Sporty design for double muffler
• It is necessary to process the metal fittings of the catch part.
• Prices and specifications are subject to change without notice

Rear corner duct panel 
For Hiace Type 1/2/3/4/5/6
Material: FRP

• Specifications: Stepless type made of FRP
• For cars with steps, the steps are hidden, and it looks like a wagon.
• A type that can be installed by covering it without removing the normal bumper.
• Sporty design for double muffler
• It is necessary to process the metal fittings of the catch part.
• Prices and specifications are subject to change without notice

Rear Spoiler Ver.1 
For High Ace (Narrow / Standard / Normal Roof / High Roof) Type 1/2/3/4/5/6 For standard roof
Material: FRP

• Specifications: Made of FRP
• Car-only product with the rear under mirror removed
• You can hide the hole after removing the rear under the mirror.
• Gel-coated product that can be painted to match the body color
• Prices and specifications are subject to change without notice.

Rear Spoiler Ver.1
For High Ace (Narrow / Standard / Normal Roof / High Roof) Type 1/2/3/4/5/6 For standard roof
Material: FRP (carbon combination)

• Specifications: Made of FRP + carbon
• Car-only product with the rear under mirror removed
• The lower center is made of real carbon
• You can hide the hole after removing the rear under the mirror.
• Gel-coated product that can be painted to match the body color
• Prices and specifications are subject to change without notice.

Roof Spoiler 
For High Ace (Narrow / Standard / Normal Roof / High Roof) Type 1/2/3/4/5/6 For standard roof
Material: FRP (carbon combination)

• Roof spoiler for narrow-body high-roof vehicles
• Prices and specifications are subject to change without notice.