Description

Product name: HD front arm (leading arm)
For Suzuki Jimny JB64, Jimny Sierra JB74 Part
Material: Carbon steel pipe (STKN11S)
Paint color: Gun metallic paint
Installation: Genuine replacement (no installation instructions)
Vehicle inspection: Vehicle inspection compatible product (* 1)
Country of manufacture: Made in Japan

• Bush is not included in the product.

Jimny’s genuine leading arm and trailing arm are made of cast iron, which has a relatively low cost, so they may bend or break in the worst case if they are subjected to intense cross-country driving. If the arm breaks, not only will it not be able to move according to the road surface, but the coil spring will come off, and the propeller shaft will come off, causing a risk of tipping over and a state of inability to drive.
The HD reading arm body is made of sturdy drawn carbon steel pipe (STKM11S), and the shear force is as high as about 18 times the axle load.

Both left and right have welded bosses for jacking up, similar to genuine arms.
About the eccentric angle of the arm and the bushing used
The caster angle of the leading arm (front) is designed to be corrected to 1 degree 30 minutes plus when using a genuine bush. Therefore, when 40mm up, the caster angle will be almost the same as the genuine one, so it will be corrected to the proper state without using the eccentric bush. * Bush is not included in the product.

(* 1) Normally, no structural change is required, and the vehicle inspection is compliant, so the strength calculation sheet is not attached to the product. There is a strength calculation sheet required when the structure is changed, so please let us know if you need it.