Description

A perfect fit thanks to a custom design! A drink holder exclusively for the Toyota GR86 and Subaru BRZ.

●Custom-designed for the GR86/BRZ
This drink holder is designed specifically for right-hand drive models of the Toyota GR86 (Model: ZN8; from Oct. 2021) and Subaru BRZ (Model: ZD8; from Aug. 2021). It mounts to the center console (passenger side) to provide an additional drink holder.

●Asymmetrical design that complements the interior
Designed to harmonize with the console and dashboard, it features an asymmetrical shape: straight along the console side and arching outward toward the passenger side. Additionally, to maintain the interior’s aesthetic, the top ring features a silver paint finish that matches the dashboard trim of the GR86/BRZ (excluding special edition or limited-run models).

●Advantages of center console mounting ◎
〇Does not block A/C airflow
Unlike standard drink holders that mount in front of the air vents, this product does not obstruct airflow. Because it mounts to the center console, you can enjoy comfortable A/C airflow on both hot summer days and cold winter days.

〇Does not obstruct the view of the side mirror
Mounting a holder on the air vent can sometimes make the side mirror difficult to see depending on your seating position, or cause reflections from the drink container to obscure the mirror. Since this product mounts to the center console, it does not interfere with your view of the side mirror.

●Disadvantages of center console mounting ×
〇Placement is about “one fist’s width” away from the shift knob
It is installed on the passenger side, approximately “one fist’s width” away from the shift knob. Some drivers may find it slightly difficult to reach the drink from the driver’s seat. Please use “one fist” as a visual reference for the distance.

〇It may be slightly in the way for the passenger. This product is designed to be mounted on the passenger side of the center console. Depending on the passenger (especially taller individuals), it may get in the way. While the mounting base is attached using adhesive tape and cannot be easily removed, the drink holder unit itself can be detached from the base.
Additionally, cushioning tape is applied to the back of the mounting base to prevent pain or discomfort if a passenger’s leg bumps against it.
Please consult with frequent passengers before purchasing.

● Holds drinks of various sizes
It accommodates drink containers with a diameter or diagonal width of 52–74 mm (as viewed from above). For containers that widen from bottom to top—such as café-style cups or chilled coffee cups—the width at a point 79 mm from the bottom must be 74 mm or less. It also features a rotating arm inside the holder to securely grip various containers, ranging from slim cans to wide PET bottles.
〇 Examples of compatible containers:
・Slim cans: Approx. 52 mm diameter (e.g., canned coffee, energy drinks)
・Wide cans: 74 mm diameter or less (e.g., 350 ml or 500 ml cans)
・PET bottles: 74 mm diameter or less (compatible with large-capacity bottles, such as 600 ml sizes)
・Café-style cups: Convenience store coffee, specialty coffee shop cups, etc.
・Chilled cups: Chilled coffee beverages, etc.
・Mug bottles (thermoses): 74 mm diameter or less (compatible if the total weight, including the bottle, is 650 g or less)
・Drink-sized car accessories: Spray-type diffusers, air purifiers, etc.
※ PET bottles with a tapered or hourglass shape may not be held stably.

● Rotating arm holds drinks securely
Equipped with a continuously adjustable rotating arm, the holder allows you to fine-tune the inner diameter to fit various container sizes perfectly. This manual, stepless adjustment mechanism helps minimize rattling or wobbling while driving. ● Includes a sponge cushion to prevent rattling
The bottom of the drink holder features a sponge cushion that prevents drinks from shaking or rattling while driving. Even when holding a slim, empty can, it minimizes distracting rattling noises, ensuring a comfortable driving experience.

● Easy, tool-free installation (Estimated time: 3 minutes)
Attach the base—designed specifically for the GR86/BRZ—to the center console using the adhesive tape on the back of the base. Then, mount the drink holder onto this base. A spare set of double-sided tape is included in case of installation errors.
The custom design ensures installation without scratching the interior or leaving permanent marks.

● Carefully selected adhesive tape for the console
You might be concerned about the durability of adhesive tape in a car interior during the scorching heat of summer. We use adhesive tape that has passed rigorous safety testing, including simulations of high temperatures (like a hot summer car) and low temperatures (like a freezing winter car).
To ensure optimal tape performance, please clean the mounting area with the included degreasing cleaner before installation.
*Please perform the installation when the interior temperature is between 15°C and 35°C. Adhesive performance may be compromised at temperatures outside this range (especially in cold interiors).

● Before purchasing
・This product is designed exclusively for right-hand drive models of the following vehicles:

Toyota GR86
Model: ZN8 | Model Year: October 2021 onwards

Subaru BRZ
Model: ZD8 | Model Year: August 2021 onwards

*Compatibility may not extend to vehicles with specification changes made after the research date (November 2022).
・This product is installed by attaching the included mounting base to the center console using adhesive tape.
・Due to the strong adhesive, the mounting base may break when removing the product from the vehicle. Caution: Please read carefully
・Do not leave a drink unattended in the holder, and do not place drinks weighing over 650g in it.
・Do not place items that may deform, degrade, or rupture due to heat (such as gas lighters or aerosol products) in the holder.
・Stability may be compromised depending on the shape of the drink container or when driving on rough roads. Please verify stability before use.
・Depending on the shape or material of the drink container, it may be difficult to insert or remove. In such cases, please hold the holder unit steady while inserting or removing the container when the vehicle is stopped.

Toyota GR86
Model: ZN8
Model Year: October 2021 onwards

Subaru BRZ
Model: ZD8
Model Year: August 2021 onwards

Part Number: NZ835
Product Name: Console-Mount Drink Holder for GR86/BRZ
Color: Black/Silver
Product Weight: 236g
Product Dimensions: H148 x W132 x D148 (mm)
Package Weight: 420g
Package Dimensions: H180 x W205 x D115 (mm)