Description

• Temporary Fitting: Always perform a temporary test fitting before installing and painting the product to adjust the overall balance and alignment. Please note that minor modifications or processing may be required for a perfect fit.
• No Returns: Returns or claims due to defects discovered after painting or vehicle installation will not be accepted.
• Handling Caution: Dropping the product prior to installation or applying excessive force during installation can lead to poor fitment. This may cause the hood to detach, break, or fail while driving, potentially leading to serious accidents. Handle with extreme care.
• Follow Instructions: Failure to follow the instructions and handling precautions listed in this document may result in damage to the vehicle itself or cause the hood to come loose and detach while driving. Do not deviate from these steps.

• Bonnet Hood x 1
• Bonnet Hood Cover x 1
• Flange Bolts (M8 × 20) x 4
• Button Head Bolts (M5 × 15) x 4

1. Remove the stock hood: Follow the vehicle’s standard service manual instructions to carefully remove the original factory bonnet hood.
2. Transfer components: Transfer all necessary hardware and components from the original factory hood to the new hood.
3. Install the hood cover: Attach the included Bonnet Hood Cover to the center duct section on the underside of the bonnet hood.
   • Visual indicator note: The circle in the diagram indicates where to use the Button Head Bolts (M5 × 15).

4. Temporary mount: Temporarily mount the new bonnet hood onto the vehicle. For the hinge sections, use the included Flange Bolts (M8 × 20).
5. Final tightening: Adjust the overall alignment and gaps until the hood is perfectly balanced, then fully tighten the hinge mounting bolts.