FRONT SIDE SPOILER
PRICE JPY 81,500
COMPATIBILITY ZX / VX / GX
SPECIFICATIONS FRP, unpainted
ACCESSORIES LED, mounting screws, and nuts
REMARKS : Requires drilling holes in the original bumper.
*GX grade requires the installation of over fenders. Cannot be installed with genuine fenders.

FRONT BUMPER COVER – JPY 103,500
Compatibility Information: All grades
Product Specifications: FRP, Unpainted
Accessories: Mounting screws, nuts, and double-sided tape
Remarks: Drilling and cutting of the original bumper is required

OVERFENDERS – JPY 115,000
Compatibility Information: ZX/VX/GX
Product Specifications: FRP, unpainted, 6 pieces, approximately 8mm wide on each side (vehicle inspection compliant)
Accessories: Double-sided tape, mounting screws, and rubber molding (black will be included unless otherwise specified. If you would prefer gray, please let us know separately.)
Remarks: No drilling is required on the body.
*Please specify the “grade” when making an inquiry or placing an order.

REAR HALF SPOILER- JPY 98,000
Compatibility Information All grades
Product Specifications FRP, unpainted
Accessories Double-sided tape and mounting screws

FRONT FOG COVER – JPY 65,000 
Compatibility Information All grades
Product Specifications FRP, unpainted
Accessories net
Remarks The original bumper cover needs to be cut.

REAR HALF SPOILER COMPATIBLE WITH GENUINE HITCH – JPY 107,000
Compatibility Information Vehicles with a genuine hitch member
Product Specifications FRP, unpainted, 2-piece + attachment
accessories Double-sided tape and mounting screws
remarks The center part is a painted original hitch cover.

BONNET HOOD COVER – JPY 93,000
Compatibility Information ZX/VX
Product Specifications FRP, unpainted
accessories Double-sided tape and mounting bolts (the holes from the factory hood top molding will be used, so no new holes need to be drilled)

COWL COVER [UN PAINTED] – JPY 65,000
Compatibility Information All grades
Product Specifications ABS, unpainted (painted version also available)
accessories Double-sided tape is pre-applied (if additional tape is required for reinforcement, please prepare your own 10mm wide x 0.8mm thick double-sided tape)

COWL COVER [PAINTED] – JPY 82,000
Compatibility Information All grades
Product Specifications Made of ABS
accessories Double-sided tape is pre-applied (if additional tape is required for reinforcement, please prepare your own 10mm wide x 0.8mm thick double-sided tape)
remarks The paint color will be the genuine body color of the Land Cruiser 250. If you would like a different color, please purchase the unpainted product and paint it yourself

GRILL MARKER – JPY 42,000
Compatibility Information All grades
Product Specifications FRP, unpainted
Accessories LED marker (IPF) and double-sided tape
Remarks It is necessary to cut a portion of the original grille near the back of the safety standard-compliant marker.

LEFT & RIGHT 4-PIPE MUFFLER –  JPY 195,000
Compatibility Information ZX/VX
Product Specifications SUS304 / Tail: φ100 round / Rear piece setting
Accessories Gaskets, stays, bolts, nuts
Remarks
For gasoline and diesel engines only / Vehicle inspection compliant
*Must be fitted after removing the spare tire.
*Can also be installed on vehicles with Modellista rear bumper garnish.
*Please specify if installing on a vehicle with the Modellista rear bumper garnish.

SINGLE SIDED REAR SIDE MUFFLER – JPY 140,000
Compatibility Information ZX/VX
Product Specifications SUS304 / Tail: φ100 slash cut / Rear piece setting
accessories Gaskets, stays, bolts, nuts
remarks For gasoline and diesel engines, / Vehicle inspection compliant
*For genuine bumper only

REAR WIPER HOLE COVER  – JPY 25,000
Compatibility Information ZX/VX
Product Specifications FRP/painted matte black
Accessories Double-sided tape/nuts